My supplier supplied some incorrect wheel shafts for 1:10 vehicles which do not come under a standard HSP part number. These wheel shafts could be suited to buyers looking to fit wider or different type wheels. The supplier RRP is (RRP $7), however since these shafts do not come under a standard HSP part number (that we know about) we are practically giving them away. At this price you can afford to grab a set to test :).
The shafts/dogbone end is similar in diameter to the 02033 shafts. The diameter of the cup end (larger end) is 10 mm and is 15 mm in length. The wheel shaft is 29 mm in length with a 10 mm threaded section. The wheel pin hole is located 17 mm from the cup end OR 12 from the tip of the threaded end.